This site uses cookies to deliver a better experience.

Terms of use Accept & Close

01704 897015 enquiries@proventure.co.uk
Menu
Proventure

News

PRO V500 resin used at Clovelly harbour
LATEST

PRO V500 resin used at Clovelly harbour

PRO V500

Read more
PRO V Asphalt anchors, Ashworth High Security Hospital

PRO V Asphalt anchors, Ashworth High Security Hospital

Proventure have recently supplied M12x100 PRO V Asphalt anchors and PRO V200 injection resin for the installation of traffic calming systems at Ashworth High Security Hospital.

PRO V Asphalt Anchors used at Newcastle airport

PRO V Asphalt Anchors used at Newcastle airport

Proventure have recently supplied 700no M10x100mm PRO V asphalt anchors and PRO V200 injection resin, for the installation of conveyor equipment at Newcastle Airport.

WRAS Approved Injection Resin

WRAS Approved Injection Resin

PRO V500 and PRO V200 injection resins have recently been awarded WRAS product approval for use in potable water. The approval demonstrates full compliance with the requirements of the Water Supply (Water Fittings) Regulations.

London client finds HILTI alternative injection resin

London client finds HILTI alternative injection resin

Proventure products have a firm reputation as cost effective alternatives to Hilti equivalents, with no reduction in performance. Following pull out tests carried our on site, a London client approved PRO V500 resin to secure the structural bars on site, overturning the original Hilti HIT-RE 500 V3 specification.

Bristol MetroBus System

Bristol MetroBus System

In 2017, work began on the Bristol MetroBus System. A joint project between Bristol, North Somerset and South Gloucestershire councils, MetroBus aims to fill in the gaps between rail and existing bus services. Proventure supplied M20 insert sockets and PROV500 resin as an approved alternative to Hilti HIT-RE 500 V3 .

Lynemouth biomass fuelled power plant

Lynemouth biomass fuelled power plant

In January 2018, work started to convert the Lynemouth coal powered power station to a new biomass fuelled power plant. PRO V200 injection resin (alternative to Hilti HY200) and M20x260mm V anchor rods were used to secure the temporary bases, support towers and hopper build up frames.

M60 smart motorway scheme

M60 smart motorway scheme

Proventure supplied PRO V500 injection resin with Proventure M24x480mm A4-316 V anchor rods as an alternative to Hilti HIT-RE 500 V3 injection resin, to secure flange mounted lighting column brackets to the concrete bridge parapets.

Thames Barrier

Thames Barrier

Our PRO V500 (alternative to Hilti RE500) was used in the refurbishment of each barriers’ concrete deck in this major project. In additon our Spit FIX Z stainless steel anchors were supplied to fix the fenders.

£9m Kirkcaldy Sea Wall improvement project.

£9m Kirkcaldy Sea Wall improvement project.

On this major project to refurbish and heighten of the existing sea wall to reduce coastal flooding, our PRO V200 was specified for the anchoring of the new sea wall panels. In addition, mechanical anchors for steel angles and shot fired fixings for concrete shuttering were supplied.